LifeSpan R7000i, Руководство пользователя

Страница: 14 / 32

A. Remove the two Carriage bolts (16) with nuts (18) and washers (17) from the
Armrest Assembly (P).
Step 5: Install Armrest and Seat Back Frame Assembly (This step may require 2 people)
B. Remove the two Allen head bolts (19) and washers (20) from the back of the
Seat Slide Frame (R).
14
C. While holding the armrest over the two mounting holes in the seat slide frame, attach
the two connectors (S) coming from the bottom of the armrest to the two connectors (T)
coming from the seat slide frame.
Note: The two-pin connectors coming from the seat slide frame can plug into
either two-pin connector from the bottom of the armrest. If color-coded, match colors.
D. Place the armrest on the seat slide frame and line of up the bolt holes. Place the seat back
frame (U) over the armrest and install the two carriage bolts (16) through the mounting holes
and secure with the washers (17) and nuts (18) removed in step 1. Do not tighten yet.
E . Install the two Allen bolts (19) and washers (20) removed in step B and tighten.
F . Tighten the two carriage bolts installed in step D.
16
19
20
S
T
18
17
U
R
P