LifeSpan R7000i, Руководство пользователя

Страница: 12 / 32

12
Step 3: Install Console Assembly
C. Slide the 3 connectors coming from the back of the console thru the center hole in
the console mount bracket (G).
D. Line the mounting holes in the back of the console with the holes in the console mount
bracket and install the 4 previously removed screws (13).
Note: Do not tighten any screws until all 4 are installed
E . Connect the 3 connectors coming from the back of the console (H) to the three connectors
coming from the top of the console mast (J).
Note: The two-pin connectors coming from the console can plug into
either two-pin connector from the console mast. If color-coded, match colors.
A. Remove the the upper and
lower console covers (K & L).
1. Remove the two screws (14)
from the bottom cover.
2. Press in at the locations
right to release the snaps and
seperate the two halves.
F . Carefully tuck all extra wire into the back of the console or into the console mast tube.
F
13
G
H
J
14
K
L
B. Remove the 4 attachment screws (13)
from the back of the console (F).