Measuring Your Blood Pressure
Turn on the Unit
Press the POWER
button to turn on.
The unit starts an auto-zero calibration
10
Select the Target User or Insert Your IHP Compatible USB Device
1. Rotate the FUNCTION key to point at the symbol.
2. The message bar should show "Select User". Press the OK button to enter.
3. There are six users to choose from. Press the navigating or keys to
select the correct user number. The message bar should display USER-1,
USER-2 ... USER-6 in sequence.
FUNCTION key to another mode.
If you plug a USB storage device into the USB port, the information on the USB
will automatically override the user selected by the FUNCTION key and the LCD
shows "USB User "; which means that the data stored in the USB storage device
is accessed. This allows the data to be read and stored to the USB storage device.
Proper Posture
level. Relax for a few minutes before taking
your measurement, then measure in a
natural position.
