13
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the
Power button on the control panel (C) or by
pressing the ON/OFF button on the remote
control (B) .
Once the power is off, heating elements
will stop working first . The fan will continue
working for up to 90 seconds to dispense
residual heat inside the heater . This is a
normal function .
1
C
B
2 . Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the
three heat settings .
Power for high is 1,500 W; low is 1,000 W . ECO
mode is an economic energy saving function .
When ECO mode is chosen, the heater will
operate to maintain a constant warm 68°F .
Note: The ECO LED light will only illuminate
when the ECO function is active and the
ambient room temperature falls below
68ºF / 20ºC .
2
C
B
HIGH
LOW
ECO
3 . Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C . Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to
the temperature on the digital display . The
heater will cycle on and off to maintain the
desired room temperature .
To engage the child lock press the child lock
button on the control panel (C) .
Note: To engage the child lock press the child
lock button on the control panel (C) . On
the remote (B), long press the child lock
button for 3 seconds to engage the child
lock .
3
C
B
OR
C
B