11
The Next section shows you how to use your heater in all 7
recommended combinations. Please reference “Heater Diagram” or
“Control Panel Diagram” for key component locations, if needed.
Instructions For Use (With Master Switch On / In Stand By Mode)
ü
To Turn On the Fan Only (No Heat and No Flame Effect)
1.
Turn the Fan Switch to the ON position (switch “B”).
ü
To Turn On the Low Heat Mode:
1.
Turn the Fan Switch to the ON position (switch “B”).
2.
Turn ON
one
of the 500W Heat Switches (either switch “C” or “D”).
3.
Engage the heat by turning the heat activation dial clockwise until it clicks (switch
“A”).
ü
To Turn On the High Heat Mode:
1.
Turn the Fan Switch to the ON position (switch “B”).
2.
Turn ON
both
of the 500W Heat Switches (switch “C” and “D”).
3.
Engage the heat by turning the heat activation dial clockwise until it clicks (switch
“A”).
ü
To Turn On the Flame Effect Only (No Heat and No Fan):
1.
Turn the Flame Effect Switch to the ON position (switch “E”).
ü
To Turn On the Flame Effect With Fan Only(No Heat):
1.
Turn the Flame Effect Switch to the ON position (switch “E”).
2.
Turn the Fan Switch to the ON position (switch “B”).
