29
Insert Strip
appears after you insert test
strip
Remove Strip
appears after you insert
test strip
Cause:
Test strip not fully inserted into test strip
holder.
Solution:
Remove test strip. When “Insert Strip” appears,
firmly insert test strip into test strip holder until
it stops.
Cause:
Not enough sample on test strip, or test
strip inserted too quickly.
Solution:
Remove test strip. Check confirmation dot. If
white patches or streaks appear, not enough
sample was applied. Repeat test with new test
strip.
When “Insert Strip” appears, firmly and more
slowly insert test strip until it stops.
QRG prof.book Page 29 Tuesday, September 17, 2002 1:41 PM
