25
Error 3
Test Strip:
Cause:
Meter detected problem with position of
test strip.
Solution:
1.Clean meter, especially contact points, but
NOTE:
Before cleaning, compare color of test
strip confirmation dot to Color Chart on test
strip bottle. If glucose level is very high or very
low, take appropriate steps to monitor patient
and provide medical care.
• Repeat test with new test strip.
• Do not move test strip after you insert it.
Remove test strip only when test is complete.
2.If you continue to get any error message,
obtain a laboratory result. Take appropriate
steps to monitor patient and provide medical
care while awaiting result.
3.Contact LifeScan for help at 1 800 524-7226.
QRG prof.book Page 25 Tuesday, September 17, 2002 1:41 PM
