Lifesaver 4000UF, Инструкция по эксплуатации

Страница: 14 / 20

>
replacing the teat
LIFESAVER bottle’s teat has been designed
to be non-tasting, replaceable and
chew-proof. Unlike many other systems
LIFESAVER bottle has been designed so
that its teat can be easily changed.
Over time the teat will wear. When it
becomes necessary to replace follow these
instructions.
1. Open the snap-fit lid.
2. Pull out the teat.
3. Remove your new teat from its
packaging.
4. Wet the teat.
5. Align the position dot on the teat with the
seam on the cap and firmly insert.
Maintaining the pump
LIFESAVER bottle’s pump has been
designed for high workloads. The o-ring
inside the pump is designed to glide easily
up and down the tube. A small amount of
silicone grease (provided) should be added
to the o-ring of the pump plunger from time
to time.
To maintain the pump follow these
instructions.
1. Unscrew the base.
2. Hold the base in one hand and with the
other hand unscrew the pump anti-
clockwise.
1
3. Place a small amount of silicone grease
around the o-ring. 2
4. Reassemble taking care not to over
tighten.
MAINTENANCE
AND
CARE
14
1
2