FlexPower AC Power System Installation Manual
ii
iii
Symbol Definitions
The following symbols are used throughout this manual.
h
This symbol is intended to alert the installer of shock haz-
ards within the enclosure. Service should only be per-
formed by qualified service personel.
i
This symbol is intended to alert the installer of impor-
tant information intended to help the installer avoid
personal injury or property damage.
Warnings
h
Installation and service should be performed only by
qualified service personel and should conform to all
local codes.
h
To reduce the risk of electric shock or fire, do not
expose this equipment to rain or moisture.
i
This equipment shall be installed in a manner which
prevents unintentional operation by employees,
cleaning personel, or others working in the premesis,
by falling objects, customers, building vibration, or
similar causes.
i
This equipment is not intended for use within the pa-
tient care areas of a Health Care Facility.
h
Replace fuses only with the same type and rating as indi-
cated in the specifications section of this manual.
i
To prevent impaired operation, ensure that all wiring is
routed and secured to prevent accidental open or short
circuit conditions.
Regulatory Information
The equipment discussed within this manual has been
tested to the following standards:
• UL2044
• UL294
• CSA C22.2 #107.1
Conventions Used Within this Manual
Positional information (eg. top, bottom, up, down, left,
right, etc.) is referenced with the board or enclosure in the
the orientation shown in the illustrations in this manual.
Notes and Warnings
