18
TrimLite User Manual Lifepro
Vibration Therapy Collection
19
Low Settings
(P1-P2)
Great for
starting out.
• Detoxification
• Increased bone
density
• Improved balance
• Lymphatic
drainage
• Improved
postural control
Medium Settings
(P3-P5)
Perfect for people
with arthritis and
fibromyalgia.
• Joint
maintenance
• Improved
postural control
• Fat loss
• Increased bone
density
• Improved balance
• Cellulite removal
High Settings
(P6-P9)
Great for
increased intensity.
• Fat loss
• Muscle growth
• Highly increased
bone density
• Power
accumulation
• HGH release
TO GET THE BEST RESULTS, ALTERNATE BETWEEN PROGRAMS
Keep your body guessing. We tend to adapt, so we want to continue eliciting
change in our bodies. Each level has its own set of benefits; however, we
recommend you start out at the first level, P1, and work your way up.
MANUAL MODE
In manual mode, vibration speeds correspond to the settings above:
Low Settings
(1-33)
Medium Settings
(34-66)
High Settings
(67-99)
Quickly troubleshoot simple issues you might experience using the table below.
Please contact us for additional assistance at:
(800) 563-6604
.
ISSUE
POSSIBLE REASON
HOW TO RESOLVE
THE MACHINE IS
NOT WORKING.
Machine is not turned on.
Flip the power switch on the
front of the machine to the ON
position.
The control panel is not on.
Press the On/Off button on the
remote control to turn on the
control panel.
THE MACHINE
STOPPED
WORKING
SUDDENLY.
Vibration plate
automatically shuts off
after the set working time.
Turn the machine on again to
begin a new workout program.
When the machine has
been working for a long
time, the motor shuts off
for overheating protection.
Allow the machine to cool for
at least 30 minutes before
using again.
THE REMOTE
CONTROL DOES
NOT WORK.
The remote control is too
far away from the infrared
sensor on the control
panel.
Point the remote control
directly at the infrared sensor
when in use. The effective
distance is approximately 6
feet.
Batteries are installed
incorrectly.
Check to see if the batteries
are installed per the polarity
markings on the inside of the
battery compartment.
Batteries are dead.
Replace dead batteries with
two new AAA batteries.
CANNOT TURN
MACHINE OFF
USING REMOTE
CONTROL OR
CONTROL PANEL
The TrimLite must be
powered off via the Power
switch.
Flip the Power switch on the
front of the machine to the
OFF position.
