Please read the operating instructions before using the AcuCare Pro. Keep
this manual for reference.
USING YOUR ACUCARE PRO
1. Insert your feet into the foot massage chambers.
2. Press the
Power button
on the control panel to turn on the AcuCare
Pro. Once the unit is powered on, the power button’s green LED will
light up.
3. Press the
Mode button
to toggle through the three available modes to
begin the massage:
a. Press the
Mode button
once for mode 1 (green LED). Press twice
for mode 2 (orange LED) and three times for mode 3 (red LED).
Each mode uses different massage techniques to soothe your feet.
2. Press the
Air Pressure button
to turn air compression on and off. When
air pressure is on, the Air Pressure LED will be green. When the air
pressure is off, the LED will be off.
3. The default air pressure intensity is medium. Press the
Intensity
button
to toggle between the three air pressure intensity levels: low
(green LED), medium (orange LED), and high (red LED).
4. Press the
Heat button
to toggle through the heat settings: low heat
(green LED), high heat (red LED), and no heat (LED off).
5. Press the
Power button
to turn off the unit at any time. Always power
off and unplug the unit after each use.
NOTE:
The massage time is 15 minutes and cannot be adjusted.
NOTE:
The unit will automatically shut down after 15 minutes of use.
Press the Power button again if you wish to continue using the device.
10
AcuCare Pro User Manual Lifepro
Re Fitness Collection
11
1. Heat Button:
Press the button to toggle through the three heat settings:
low (104
°
F), high (117.7
°
F), and off.
2. Mode Button:
Press the button to toggle through the three modes (1-3).
3. Power Button:
Press the button to turn the AcuCare Pro on and off.
4. Air Pressure Button:
Press the button to turn air pressure on and off.
5. Intensity Button:
Press the button to toggle through the three air pressure
intensity levels: low, medium, and high. The default intensity is medium.
CLEANING THE REMOVABLE CLOTH COVERS
1. Unzip the two removable covers and remove them from the foot massage
chambers.
2. Soak a soft, clean cloth or towel in soapy water. Completely wring the cloth
out.
3. Use the cloth to gently clean the removable covers.
4. Allow the removable covers to completely dry.
5. Tuck the covers back into the foot massage chambers and zip each cover
into place.
USING THE CONTROL PANEL
1
2
3
4
5