8
TABLETOP INSTALLATION
(Preparation: Two stand feet and Two 4*25 screws).
Fix the standing leg on the products by using the two 4*25mm screws, as shown in the figure above.
Warning:
If you choose freestanding use, you don
’
t need to fix the wall hanging holder on the wall.
OPERATING INSTRUCTION
1
、
Start and select working mode
Turn the heater on by pressing the ON/OFF button on the control panel or by
pressing the Power button on the supplied remote control.
Once power is off, heating element will stop working at first. Fan will prolong
working for 3 min to emit plenty of heat inside. This mark will indicate running
during the 3 min.
Select a heat Mode
Press the MODE button to toggle between the three heat modes.
screws
screws
