d
Speed
Timer
Humi
Osc
Cool
On/
Standby
REMOTE CONTROL
- 11 -
- 12 -
For your convenience, the remote control features the same buttons as the fan control
panel. Follow the operations in"USING THE CONTROL PANEL".
GUIDELINES FOR USE OF BATTERIES
· If the remote control will not be used for a long period of time, remove the batteries from
the battery compartment.
· The remote control uses one CR2025 battery.
· Clean battery contacts and those of the device prior to battery installation.
· Remove used and dead/discharged batteries promptly.
DISPOSE OF THE BATTERY
· The battery must be brought to a household hazardous waste collection site for proper
handling.
PRECAUTIONS FOR USE
1. When only start the “Humid” function after plug in, while the machine detected the water
shortage, the buzzer will give an alarm, and the corresponding "Humid" LED will flash.
After adding water, press the "Humid" button to release the alarm
.
2. When only start the “Cool” function after plug in, while the machine detected the water.
shortage, the buzzer will give an alarm, and the corresponding "Cool" LED will flash. After
3. If both the "Cool" button and the "Humid" button are turned on, while water shortage is
detected, the buzzer will give an alarm, and the "Cold" led will flash, and press the "Cold"
button to release the alarm after adding water.
4. If the machine has no operation for 2 minutes, the LED screen will be off automatically.
Press any button to restart the LED screen, resume to the last status.
5. Once plug in, the machine will sound buzzing.
6. Normal and effective operation once, the machine will sound buzzing once.
7. When water shortage is detected, the buzzer rings 5 times.
8. When the temperature sensor is open or short circuited, the fault display: constant
temperature display 77°F.
· The remote control must be pointed towards directly the receiver on the fan when using.
· The working range for the remote control is 5 meters. If the remote control is not pointed
directly towards the receiver, the range will be decreased.
· The remote control may not operate in a room where heavy machinery is operating.
· Do not block the line of sight between the remote control and the receive.
· Handle the remote control with care. Do not drop the remote control on the floor or bang
it against hard objects.
Note: Remove the plastic insulation film located underneath the battery before
using the remote.
remove
open
close
