HOW TO USE ICE BOX
- 9 -
- 10 -
Put the ice box into the refrigerator to freeze, and then put it into the water tank to reduce
the water temperature, so that the wind blows out is cool. It is strictly prohibited to open
the ice crystal box and swallow it. The ice box can be used continuously.
1.Make sure the product is unplugged from the mains before filling or refilling the water.
2.Only use water in the water tank. Do not add any chemicals ,oils or other additives.
3.Only use cold water in the water tank(previously boiled)
4.Make sure the water level in the water tank is between minimum level .( indicated by
“Min”)and maximum level(indicated by “Max”)
Plug in the power, the cooler make a buzzing sound, and the power indicator light is on,
cooler enter standby mode.
Press the " " button to start the cooler machine, the power indicator light will be on,
and the fan will run at medium speed automatically; the medium speed light will be on,
the display screen will show the current room temperature.
ON/OFF
Press the " " button, the wind speed will cycle from medium to high to strong to low.
The first light will be on at low speed, the second light will be on at medium speed, the
third light will be on at high speed, and the fourth light will be on at strong speed.
FAN SPEED
Press the " " button, with the 1-12 hour timing shutdown function, will be added for one
hour by pressing each time. Determine the timing in a few seconds.
TIMER MODE
Press the " " button, the Osc outlet will starts to run, press again to stop the rotation,
the direction of rotation is random.
OSCILLATION
Press the " " button, and the water pump starts to work. When the water tank is short
of water, the cooler machine will give buzzing alarm, and then the "Cool" indicator will
flash. After adding some water, then press the "Cool" button, stop the buzzing alarm.
COOL MODE
Press the " " button to start humidification function
(1) When the cooler machine is operating with the "Cool" function, and press the "Humid"
button, if the water does not reach the min water level, the buzzing alarm will start, and
then the "Cool" indicator will flash; if the water exceeds the min water level, the
humidification function will start.
(2) When the machine is operating with the normal wind function(no cool), and press the
"Humid" button, if the water does not reach the min water level, the buzzing alarm will
start, and then the "Cool" indicator will flash; if the water exceeds the min water level,
the humidification function will start.
(3) Only start humidification function: when the whole machine is in standby mode, press
the "Humid" button, if the water does not reach the min water level, the buzzing alarm will
start, and then the "Cool" indicator will flash; if the water exceeds the min water level, the
humidification function will start.(Note: the water shall not exceed the max water level)
HUMIDIFICATION
ATTENTION!
PANEL CONTROL
