ON/OFF
TIMER
SPEED
SWING
COOL
MODE
CONTROL PANEL
- 8 -
- 9 -
Before using the remote control, you must remove the insulating film.
1. All functions performed with remote control work identically to the fan control panel.
2. Aim the remote control at the fan control panel to operate the fan.
REMOTE CONTROL
The remote control uses on button cell battery, type CR2025(3V). To remove the battery
carriage use your thumb to squeeze the release tab to the right and then pull the carriage
out. Place the battery into the carriage and slide the carriage back into the remote.
ON/OFF :
Press this button to open the air cooler ;
Press this button at any state to stop the operation.
SWING :
Press to control the left-right swing; Press again to stop
swinging.
SPEED :
Press to change the wind speed into Small / Middle / High.
NOTE:
Follow battery disposal instruction on battery packaging, or contact your local safety
council for safely disposal of batteries.
TIMER :
Press to set timing system. The timer range is from 1h-7h.
COOLING :
Press to open or close the cooling system.
MODE :
Press to change the wind type into Natural / Sleeping /
Normal Mode.
Power button. press this button to open the air cooler ;
Press this button at any state to stop the operation.
Press to set timing system.
The timer range is from 1h-7h.
Press to change the wind type into
Natural / Sleeping / Normal Mode.
Press to change the wind speed into
Small / Middle / High.
Press to control the left-right swing;
Press again to stop swinging.
Press to open or close the cooling system.
Notice: Do not open the cooling system when the water tank is empty.
