4
3
HOW TO USE
FRUIT FILTER JUICER JAR
• Insert the fruit filter into the blender jar and rotate it slightly so that
it settles down and the grooves get locked with the slugs on the
blender jar wall.
• Place the lid on the jar and rotate it anti-clockwise to lock.
• Place the assembly onto the drive shaft of the juicer mixer grinder
and rotate clockwise to lock it into position.
• Cut small pieces of fruits to be juiced.
Fig 1
• When removing the blade please keep the washer in a good condition for fitting
again.
• The jars can be cleaned by using regular dishwashing soap.
• After thoroughly rinsing with soap, clean the jars with a dry cloth.
• Never store the jars with closed lids.
• Do not use any detergent soap solutions on the main body.
• Clean the body with a dry cloth before storing for next use.
• Never immerse the motor in the water for cleaning
• Since the blades are quite sharp, be careful while changing them
• Never pull the cord to take out the plug from the socket
• Always switch off the power supply button before cleaning, emptying or when
not in use.
• For citrus fruits like oranges and sweet limes it is advisable not to use the
plunger so that the seeds pop up automatically. However, for best results cut
the fruit into small pieces and remove the seeds before extracting juice
• Do not use the Liquidizer jar for dry/wet grinding, grating, chopping or mincing
functions.
• Do not worry if you experience some burning smell when you run your mixer grinder
for the first time.
This is due to the motor varnish getting heated for the first time. The problem
should not recur in subsequent uses. If it does, please contact our customer care.