5
6
OPENING YOUR SAFE FOR THE FIRST TIME:
To open the safe for the first time, please use the emergency key. The operation in
details refers to “opening the safe with the emergency key”.
• Remove emergency lock cover, then insert the emergency key, and turn it count
clockwise.
• Turn the knob (master key) clockwise to open the door.
CAUTION:
Finish operation, pull out the emergency key and keep it in a safe place.
INSERTING THE BATTERIES:
• Open the door.
• Insert 4 X AA batteries into the battery compartment.
• Under normal condition both red and green lights are on at the same time. It means
the voltage is low and you should insert new batteries.
CAUTION:
Replace 4 batteries by lining them up in a manner as indicated by the “+ “
and “ - ” signs. You should reset the user's code after replacing the batteries.
OPENING DOOR:
CLOSING DOOR:
• Input your user’s code (3 to 8 digits), each press results in one beep and the yellow
light flashes.
• Press “#” or “*” confirming button, the green light will be on.
• Rotate the knob (master key) clockwise and pull outwards within 5 seconds, the door
is opened.
CAUTION:
The user preset code is “159”. Please input the user code again if the yellow light
flashes with beeps.
• Turn the knob (master key) counter clockwise to close the door.
AUTOMATIC LOCK:
• 3 continuously wrong entries will activate the warning beeps.
CAUTION:
The key pad would be disabled during the beeping. The beeping will stop
automatically after aprox 20 seconds or can also be stopped by opening the safe with
emergency key & power-cut by removing the batteries.
