4
5
Part No.
Part Name
1.
Carry handle
2.
Motor unit
3.
Blowing port
4.
Power cord
5.
Plastic bucket
6.
360° rotation wheel
7.
Side locks
8.
Flexible hose pipe
9.
10.
Hose handle
11.
Suction port
12.
ON/OFF switch (O-OFF,“-”ON)
13.
Floor cum carpet brush
14.
Integrated nozzle
15.
Extension tubes (2 piece)
16.
Cloth filter (Dry use)
Sponge filter (Wet use)
The hose pipe and the Vacuum Cleaner linking up
1. Insert: Insert the tube connector into the cleaner, and then rotate it clockwise
until it is locked.
2. Exsert: Hand the tube connector, rotate it counter-clockwise until exsert the tube.
3. When using the blowing function, insert the main suction pipe into the blowing
port, then rotate it clockwise until it is locked. When exserting it, rotate it
counter-clockwise, exsert the main suction pipe.
Hose Pipe connect with other attachments
1. Contact joint: insert one end of the tube into the brush, then rotate it clockwise
until it's very tight.
2. Exsert: Hand both ends of the brush, rotate it counter-clockwise until it's out.
HOSE PIPE CONNECTS WITH OTHER ATTACHMENTS
HOSE PIPE AND THE VACUUM CLEANER LINKING
