13
4. Seat Post, Seat Post Bellows, Seat Cushion, Right/Left Handrail Arms
,
and
Computer Installation
Remove three Ø8 Washers (42) and three M8 Nylon Nuts (69) from underside of the
Seat Cushion (70). Guide bolts on underside of the Seat Cushion (70) through holes on top
of the Seat Post (71), attach with three removed Ø8 Washers (42) and M8 Nylon Nuts (69).
Tighten nylon nuts with the Multi Hex Tool provided.
Slide the Seat Post Bellows (72) over the Seat Post (71).
Insert the Seat Post (71) into the Seat Post Plastic Bushing (74) on the tube of the Main
Frame (34) and then attach the M12 Seat Height Adjustment Knob (73) onto the tube of the
Main Frame (34) by turning it in a clockwise direction to lock the Seat Post (71) in the
suitable position.
Adjusting the Seat Height
Turn the M12 Seat Height Adjustment Knob (73) in a counterclockwise direction to release
the Seat Post (71) and then slide the Seat Post (71) up or down slightly to the desired hole
for the suitable position. Lock the Seat Post (71) in place by tightening the M12 Seat
Height Adjustment Knob (73) in a clockwise direction.
NOTE: When adjusting the height of seat post, make sure the seat post plastic
bushing does not exceed the mark line on the seat post.
Tool:
Multi Hex Tool S19, S10, S13, S17
72
73
6
4
3
6
32
44
19
32
34
74
42
69
70
71
14
13
