manualshive.com logo in svg

LifeGear DYNASTY 26800N, Руководство пользователя

Поделиться
Скачать
LifeGear DYNASTY 26800N Скачать руководство пользователя страница 12

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STEP 5

 

Attach the Rear Main Frame (20) into the Front Main Frame (76) with six Washers (8) and 
six Hexagon Socket Pan Head Cap Bolts (17) that were removed.    Tighten bolts with the 
S6 Allen Wrench provided. 

 

 

 

 

 

 

 

 

 

 

 

 

 
STEP 6 
The Cranks, Pedal Shafts, and Foot Pedals are marked with the letter R (Right) and L 
(Left) to denote the side of the recumbent bike they are on.   

Insert the pedal shaft of Left Foot Pedal (66L) into threaded hole in the left Crank (67).    Turn 
the pedal shaft by hand in the counterclockwise direction until snug.   

NOTE: DO NOT turn left foot pedal shaft in the clockwise direction, doing so will strip 
the threads. 

Tighten the pedal shaft of Left Foot Pedal (66L) with the Multi Hex Tool with Phillips 
Screwdriver provided. 
Insert pedal shaft of Right Foot Pedal (66R) into threaded hole in right Crank (67).    Turn the 
pedal shaft by hand in the clockwise direction until snug.     
Tighten pedal shaft of Right Foot Pedal (66R) with the Multi Hex Tool with Phillips 
Screwdriver provided.

 

17 8

8

17

76

17 8

8

17

8 17

76

20

67

66R

66L

Содержание DYNASTY 26800N





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды