background image

 

3

IMPORTANT SAFETY INSTRUCTIONS 

 

Basic precautions should always be followed, including the following important 
safety instructions when using this equipment.    Read all instructions before using 
this equipment. 

 
1.  Read all instructions and follow it carefully before using this equipment.    Make sure the 

equipment is properly assembled and tightened before use. 

2.  Before exercise, in order to avoid injuring the muscle, warm-up exercises are 

recommended. 

3.  Please make sure all parts are not damaged and fixed well before use.    This 

equipment should be placed on a flat surface when using.    Using a mat or other 
covering material on the ground is recommended. 

4.  Please wear proper clothes and shoes when using this equipment; do not wear clothes 

that might catch any part of the equipment. 

5.  Do not attempt any maintenance or adjustments other than those described in this 

manual.    Should any problems arise, discontinue use and consult your local dealer. 

6.  Be careful when step on or leave the pedal always hold the handlebars first.    Make the 

pedal at your side at the lowest position, step on the pedal, and stride over the main 
frame then step on the other pedal.    When using, please hold the handlebar by hands, 
make the pedals running smoothly by push or pull handlebars, then run the equipment 
regularly by cooperation of hands and feet.    After exercise, please also make one 
pedal at the lowest position and leave your foot on the higher pedal first and then 
another. 

7.  Do not use the equipment outdoors. 
8.  This equipment is for household use only.    It is not a commercial model. 
9.  Only one person at a time should use this equipment. 
10.  If you feel any chest pains, nausea, dizziness, or short of breath, you should stop 

exercising immediately and consult your physician before continuing. 

11.  Care should be taken in mounting or dismounting the equipment. 
12.  Do not allow children to use or play on the equipment.    Keep children and pets away 

from the equipment while in use.    This machine is designed for adults use only.    The 
minimum free space required for safe operation is not less than two meters. 

13.  The maximum weight capacity for this product is 110 kgs. 
 

WARNING:

 

Before beginning any exercise program consult your 

physician.    This is especially important for the people who are over 35 years old or 
who have pre-existing health problems.    Read all instructions before using any 
fitness equipment.

 

 

CAUTION:

 Read all instructions carefully before operating this product. 

Retain this Owner’s Manual for future reference. 

 

Содержание CLASSIC PRO 93790






































Отзывы: