9
5. Handlebar Post Installation
Release the Locking Knob (39) and then loosen the Round Knob (38) by turning
counterclockwise direction until it can be pulled out. Pull out the Round Knob (38) and then
insert the Handlebar Post (13) into the Plastic Bushing (12) on the tube of the Main Frame
(24). Slide the Handlebar Post (13) up or down direction to the suitable position. Lock the
Handlebar Post (13) in place by releasing the Round Knob (38) and sliding the Handlebar
Post (13) up or down slightly until the Round Knob (38) "pops" down into the locked position.
For added safety, tighten the Locking Knob (39) and Round Knob (38) in a clockwise
direction.
NOTE: When adjusting the height of Handlebar Post (13), the STOP line cannot higher
than the edge of Plastic Bushing (12).
13
38
39
24
12