LifeGear 26690 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 28

LifeGear 26690 Скачать руководство пользователя страница 24

23

ADJUSTMENTS

Adjusting the Adjustable Leveler

Turn the adjustable leveler on the rear stabilizer as
needed to level the recumbent bike.

Adjusting the Front Handlebar

Hold the front handlebar while loosening the front
handlebar T-Knob. Adjust the front handlebar to
the desired position and turn the front handlebar
T-Knob in a clockwise direction to tighten.

NOTE: Continue to turn the front handlebar
T-Knob until front handlebar is secure before
exercising.

Adjusting the Seat

Forward or Back

Release the triangle knob from the rear main frame.
Turn the round knob in a counterclockwise direction
until it can be pulled out.    Pull out the round knob
and then slide the back and seat support bracket
back or forth direction to the suitable position.    Lock
the back and seat support bracket in place by
releasing the round knob and sliding the back and
seat support bracket back or forth slightly until the
round knob "pops" down into the hole of the seat
sliding tube.    For added safety, tighten the round
knob and triangle knob in a clockwise direction.

NOTE: When adjusting the seat back or forth direction,
make sure the bushing does not exceed the mark line
on the seat sliding tube.

Triangle Knob

Round Knob

Adjustable Leveler

Front Handlebar T-Knob

«
...
22
23
24
25
26
...
»

Содержание 26690





























Отзывы:

Нет отзывов