8
ASSEMBLY INSTRUCTIONS
1. Front/Rear Stabilizers and Right/Left Foot Pedals Installation
Position the Front Stabilizer (43) in front of Main Frame (48) and align bolt holes.
Attach the Front Stabilizer (43) onto the front curve of the Main Frame (48) with two
M8x90mm Carriage Bolts (44), two Ø8xØ20x2 Big Curve Washers (45), and two M8 Cap
Nuts (46). Tighten cap nuts with the Multi hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (74) behind the Main Frame (48) and align bolt holes.
Attach the Rear Stabilizer (74) onto the rear curve of the Main Frame (48) with two
M8x90mm Bolts (77) and two Ø8xØ20x2 Big Curve Washers (45). Tighten bolts with the
S6 Allen Wrench provided.
Install two M10 Adjustable Levelers (76) with two M10 Hexagon Nuts (75) onto the Rear
Stabilizer (74).
Foot Pedals Installation
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and
“L” for Left.
Insert the pedal shaft of Left Foot Pedal (49) into threaded hole in the left Crank (65). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (49) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (72) into threaded hole in right Crank (65). Turn the
pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Foot Pedal (72) with the Multi Hex Tool with Phillips Screwdriver
provided.
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Allen Wrench S6
77
74
75
76
76
75
72
49
65
46
45
43
44
48
45
