LifeFitness Elevation Series Flexstrider, Руководство по сборке

Страница: 12 / 27

10
4
s
erviCe anD
t
eChniCal
D
ata
4.1 p
reventive
m
aintenanCe
t
ips
The Life Fitness FlexStrider Variable-Stride Trainer is backed by the engineering excellence and reliability of Life Fitness
and is one of the most rugged and trouble-free pieces of exercise equipment on the market today.
Note: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep
the equipment out of use until the defective parts are required or replaced. Pay special attention to parts that are subject
to wear, as outlined below.
The following preventive maintenance tips will keep the Life Fitness FlexStrider Variable-Stride Trainer operating at Peak
performance:
Note: Long fingernails may damage or scratch the surface of the console. Use the pad of the finger to press the keys.
LIFE FITNESS Approved Cleaners
(United States Availability Only)
Two preferred cleaners have been approved by Life Fitness reliability experts: PureGreen 24 and Gym Wipes. Both
cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial
Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a convenient spray. Apply the spray to a microfiber cloth and wipe down the equipment.
Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for
fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes
on the equipment for at least 2 minutes for general disinfection purposes.
Contact Life Fitness Customer Support Services to order these cleaners.
Call 1-800-351-3737 or email: customersupport@lifefitness.com.
LIFE FITNESS Compatible Cleaners
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior sur-
faces. Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning. DO NOT use ammonia or
acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the
equipment surfaces.
Important: Turn the cross-trainer off and unplug prior to performing any maintenance
Weekly
Inspect the power cord. If the cord is damaged call technical support. Make
sure the cord is positioned in a location where it will not be damaged.
Monthly
Clean the top surface of the pedals
Clean the display console and all exterior surfaces with mild soap, water
and a soft cotton cloth or a Life Fitness approved cleaner.
Note:
Do not use paper towels, ammonia or acid based cleaners on the
product. At no time should cleaner be applied directly to any part of the
equipment; spray the cleaner on a soft cloth and then wipe the unit.
Inspect the exterior parts for wear and check that user assembly bolts are
still tight.