6.
Composition and layout
WARNING: Before lifting the surface, the incline of the treadmill must be in the
starting position.
Composition
:
First turn off the machine and unplug the power cord
Grasp the rear of the frame
and lift the plate until the latch engages.
Now you can move the machine using the
wheels.
Caution:
Make sure the board is ensure before handling the machine. Do not turn on
the machine.
Layout:
Hold the rear of the frame with one hand, and then use your foot to gently push the
top of the hinged frame apart. The board will then automatically lower to the
ground.
C
aution
: Do not stand under the treadmill when unfolding.
7.
Checking V
-
belt and treadmill settings
If you seem to slip the treadmill, the next steps
will determine which part is a release
and needs to tighten, if it's a running belt or a V
-
belt on the engine.
1.
Turn off the main switch off and unplug the power cord (out of the socket).
Loosen the side bolts on the engine guard and take down the cover.
2.
T
urn on the treadmill again and set the speed to approximately 3km / h. Stand
on the belt and pull it firmly (pressure) to stop it.
