EN
General Care:
• Before first use, place glass bottle and silicone nipple or valve in
boiling water for 3 minutes to ensure cleanliness. Please note that
silicone valves are only included in sippy caps.
• Use caution when boiling the glass bottle and silicone nipple or
valve as the boiling water and steam may cause severe skin burns.
• Before first use and as soon as possible after each use, wash all
parts with warm, soapy water. Rinse all parts thoroughly and
allow time to dry.
• To allow venting and prevent nipple/valve collapse, do not
over-tighten lid when reassembling product.
• For sippy caps only, before first use, pinch the tip of the silicone valve. Control silicone valve flow rate by tightening
or loosening cap. Valve in sippy cap is removable for fastest flow.
• Contents should not be left in the container for longer than 24 hours. As soon as possible after each and every use,
wash all parts with warm soapy water. Rinse all parts thoroughly with clean water. Allow all parts to dry completely
prior to next use or storage.
• DO NOT use abrasive cleaners or scrubbers since they may scratch or chip the glass.
• DO NOT use bleach or cleaners containing chlorine on any parts of the product.
• This product is top-rack dishwasher safe; however, hand washing is recommended as the dishwasher uses harsher
detergents and hot water that may affect the appearance of your product.
4oz & 9oz Glass Baby Bottle
CARE AND USE GUIDE
