Page | 7
Congratulations!
You have completed the assembly process for the LS-XT Air Bike. Please inspect the bike
both visually and functionally before performing a workout routine. Make sure there are no
loose parts and that all the nuts & bolts are tightened. Test the bike at a slow pace to make
sure everything is working properly.
How to Adjust the Seat Height
Proper seat height is important for an efficient exercise. To determine the proper seat height, sit on
the bike and while the foot pedal is in the down position, try to center the ball of your foot with your
knee. Your leg should be slightly bent and relaxed. It should never extend straight nor bent too
much.
Make all adjustments to the seat height while off of the bike. Adjust the seat position height on the
bike by loosening knob #(55). Adjust it according to each
user’s height. Select the desired seat
height by pulling on the #(55) pop pin with one hand while pulling up or pushing down on the post
with the other hand. Once the height is selected tighten the knob clockwise to ensure the seat post is
secure.
Note:
The pin for the adjustment knob (55) must be inserted into one of the adjustment holes in
the seat post (4). The adjustment knob (55) must be screwed in tightly to ensure the seat post is
secure into the main frame. Failure to do so could cause serious injury or damage to components.
Step 5: Seat Assembly
1) Locate the seat pad.
2) (
See Figure 5
)
Pull out on the #55 pop pin
to slide the seat post up.
Loosen the
preinstalled hardware on the seat pad. Attach
the seat #(60) to the seat post #(4). Join them
using the preinstalled three flat washers
#(59), spring washers #(16) & M8 Nylon Nuts
#(48). Use the 13mm wrench to tighten the
hardware. Make sure that the seat pad is
aligned straight before it is securely fastened.
Figure 5
48
60
16
59
55
4
1
