lifeBeam SMART HAT, Быстрый старт

Страница: 13 / 75

Storage
When storing, do not put objects inside the hat that may scratch or damage
the sensor.
Washing
Step 1: Removing the LifeBEAM Electronic Unit
disconnect the cable connecting the LifeBeaM electronic Unit to the hat.
remove the Unit from the pocket located on the inner back side of the Cap, or
the inner right side of the Visor. Make sure you close the end of the cable back
inside the pocket while washing, and store the electronic Unit in a safe location.
Step 2: Washing the hat
Please hand wash in cold water.
DO NOT: Bleach, tumble dry, iron, soak or dry clean.
Step 3: Replacing the LifeBEAM Electronic Unit
ensure the hat is completely dry before returning the LifeBeaM electronic Unit
to the pocket and reconnecting the cable that attaches it to the hat.