Page 8 of 8
7.5 Storing or transporting Reader
To make sure the Reader operates correctly, the following conditions for
the storing and transportation must be met:
• Store the Reader and the batteries in dry conditions in the temperature
between -20ºC – +50 ºC.
• Store the batteries fully recharged, detached from the Reader.
• Remove the carrier when transporting and / or storing the Reader to
avoid damage to the Reader.
• Reattach the piece of cardboard back into the swing bed to protect it
during transportation and / storing.
8 Troubleshooting
8.1 Warning and error messages
The Reader display shows warning and error messages.
Warning messages inform about a problem or a failure, but it is possible
to continue working with the Reader after receiving one.
Warning messages
Explanation
USE RECHARGER
The Reader battery is running out of
power.
You should recharge the battery as soon
as possible. You can continue working
while the battery is recharging.
NOT CALIBRATED
Please contact Lifeassays AB.
TEMPERATURE HIGH
High temperature of the Reader may affect
the measurement results.
This warning will disappear when suitable
operating temperature has been reached.
TEMPERATURE LOW
Low temperature of the Reader may affect
the measurement results.
This warning will disappear when suitable
operating temperature has been reached.
NOISE LEVEL HIGH
Please contact Lifeassays AB.
REPLACE BATTERY
The Reader battery is reaching the end of
its lifespan.
The battery needs to be replaced. New
batteries can be ordered from Lifeassays AB.
Error messages inform about a problem or failure and require actions
before you can continue working with the Reader, for example pressing
the POWER button.
NOTE
if pressing POWER button does not solve the
situation, contact Lifeassays AB.
Warning messages
Explanation
BATTERY
VOLTAGE LOW
The Reader battery is running out of
power.
Connect the Reader to the recharger to
be able to carry out the measurement
sequence. You can continue working while
the battery is recharging.
RECEIVER FAILURE
Electronics failure in the receiver.
Press POWER button to return to the main
display view.
TRANSMITTER FAILURE
Electronics failure in the transmitter.
Press POWER button to return to the main
display view.
POSITIONING FAILED
The position of the carrier is incorrect.
Press POWER button to return to the main
display view.
MOTOR
CURRENT HIGH
The carrier could not be lifted.
Press POWER button to return to the main
display view.
9 Disposing of Reader
When the Reader has reached the end of its lifespan, it must be disposed
of with other electronic waste. The battery must be removed and
disposed of according to the national and / or regional legislations.
Magnia is a registered trademark of Magnasense Technologies Oy.
Latest update of the User Manual 27.09.2017
Manufactured for LifeAssays AB by
Magnasense Technologies Oy
Rajatorpantie 41C
FI-01640 Vantaa
FINLAND
LifeAssays AB, IDEON Science Park, SE-223 70 Lund, Sweden
Phone: +46 46 286 54 00, Email: [email protected], Web: www.lifeassays.com
E-25-0025-01
