C. The LIFESMART Infrared Heater has a Delay Start Function which controls the AC Cross Flow
Fan. The purpose of the Delay Start Function is to allow the Infrared Quartz Bulbs to heat up
before the fan begins to circulate the air flow. In addition, the AC Cross Flow Fan will continue to
circulate the airflow after the power is turned off to circulate the warm air from the LIFESMART
Infrared Heater cooling the unit down.
D. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature
and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it
simplifies and makes controlling the unit easy. Operating the heater is logical and can be done
on the unit itself or by remote.
E. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature
and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it
simplifies and makes controlling the unit easy. Operating the heater is logical and can be done
on the unit itself or by remote.
F. The sleek, yet beautiful fireplace display is an added visual bonus with adjustable lighting that
adds ambience to any occasion.
Unpacking the LIFESMART Infrared Heater
1. First, check the carton to make sure there are no obvious damages that may have occurred
during shipment.
2. Open the LIFESMART Infrared Heater packaging and remove the heater by sliding it from the box.
You may want to gently and cautiously turn the entire box upside down letting the heater slowly
slide out.
3. Remove all the protective materials from the heater. It may be a good idea to keep the protective
materials and packaging for storage during the off-season.
Operating Instructions
Visually inspect the
LIFESMART
Infrared Heater for any damages before operation. Do not
operate the heater if any damages are detected. Contact your dealer immediately.
NOTE:
“UP” and “DOWN” arrow buttons on the control panel and remote control have
dual function capabilities.
Adjust TIME / TEMP with up arrow or adjust HI / LOW settings.
Adjust TIME / TEMP with down arrow or adjust
0
C/
0
F settings.
