12
OPERATING INSTRUCTIONS
4 . To set the timer power off, start the unit and
press the Timer button on the control panel (C)
or remote control (B) .
Note:
The timer-power-off function can only be
set when the heater is in power-on mode .
The digital display on the control panel (C)
changes from the set temperature readout to a
time value for the timer . Press the Timer button
repeatedly to change the number value between
a range of 0 to 12 hours (in 1-hour intervals) .
The Timer light turns on when the timer is set .
4
C
B
TIME
TIMER
5 . To set the timer power on, while powering off
the unit press the Timer button on the control
panel (C) .
Note:
The timer-power-on function can only be
set when the heater is in power-off mode .
The digital display on the control panel (C) will
indicate time value for the timer . Press the
Timer button repeatedly to change the number
value between a range of 0 to 12 hours (in 1-hour
intervals) .
The Timer light turns on when the timer is set .
5
C
B
TIME
TIMER
6 . To power on or adjust the flame effect
brightness, press the Flame Effect button on
the control panel (C) or Dimmer Button on the
remote control (B)
Note:
The flame effect function can be set when
the heater is in the on or off mode .
Pressing the button repeteadly will cycle
between the various color and off modes .
6
C
B
7 . To replace the batteries, remove the battery
cover (1) from the remote (B) by applying
pressure to the battery cover (1) and sliding
it away from the remote (B) . Insert two AAA
batteries (not included) (2) and close the remote
by placing the battery cover (1) back on the
remote (B) .
Note:
Do not mix old and new batteries . Do not
mix alkaline, standard (carbon-zinc), or
rechargeable (NiCad, ni-mh, etc) batteries .
7
B
1
2
