51
LIFE MXL-9 C/UC
LifeIonizers.com/support
Q: Do I need to hire a plumber to install the units?
A: Most people find it is not necessary to call a plumber for most
standard installations. For custom installations, a plumber may
be needed depending on the individual circumstances.
Q: What do I do if the filters are leaking?
A: It is important to note where on the filter it is leaking. Most
leaking comes from fittings that are not seated properly. Reseat
the tubing into the filter by pushing in firmly and then pulling
back. It may be necessary to re-trim the end of the tubing to get
a fresh surface. Make sure to shut off the water before working
with the water supply lines.
Q: How do I set up the pre-filter unit?
A: The pre-filter is installed in the supply line on the ionizer.
Quick connects are provided for your convenience. Simply push
the tubing in the connector and it seals automatically. When
installing the filter for the first time, it is suggested to let the
filter fill with water for a few minutes before turning on the
ionizer.
Q: How do I know what pre-filter I need?
A: A water report is necessary to determine what type of filter
is needed. Well water may need to be tested by an independent
water testing company. Please contact your sales representative
and they will pull your Federal Water Report, analyze it, and
recommend filters.
