22
LIFE MXL-9 C/UC
LifeIonizers.com/support
PH TESTING WITH DROPS
To test and to determine the pH of your water, you will have to select
the level you are testing as well as combining the liquid reagent pH
drops provided with the purchase of your ionizer with a sample of
water gathered from your ionizer.
1. To begin this process, you will need a small clear glass of some sort.
2. Turn on your water ionizer and select the level of alkaline or acidic
water you will want to test. Please wait 10 seconds before collect-
ing the water.
3. You will then need to add 2-3 liquid reagent pH drops to the glass
first and collect 1 ounce (2 tbsp) of water from your ionizer.
4. After that you will need to compare the water you tested with the
color ph chart provided with the pH drops.
5. You will need to adjust the amperage levels depending on your
source water. We recommend you set water pH to
ALK1
-light
blue/
ALK2
-dark blue/
ALK3
-light purple/
ALK4
-dark purple.
6. To do this follow the F-20 steps on the next page.
2-3 drops
small clear glass
2 tbsp water
Add to glass:
1.
+
ALK1
ALK2
ALK3
ALK4
2.
3.
4.
5.
Adjust amperage
levels by following
the F-20 steps on
the next page
6.
collect water
