Life Gear Orbi trac 28320 Скачать руководство пользователя | Manualshive

Страница: 17 / 27

background image

16

7. Handlebar Decorate Covers AB Installation

Remove one M8x65 Bolt (85), one M8x78 Bolt (88), two M8x38 Bolts (87), and four M8
Nylon Nuts (69) from the Handlebar Decorate Covers AB (84, 92). Remove bolts with the
6mm Allen Wrench provided.
Attach the Handlebar Decorate Covers AB (84, 92) onto the Front Post (77) with one M8x65
Bolt (85), one M8x78 Bolt (88), two M8x38 Bolts (87), and four M8 Nylon Nuts (69) that were
removed. Tighten bolts with the 6mm Allen Wrench provided.

8. Computer Installation

Remove four M5x10 Bolts (86) from the Computer (91).    Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided.
Connect the Extension Sensor Wires (97) to the wires that come from the Computer (91).
Tuck wires into the Front Post (77).    Attach the Computer (91) onto the top end of the Front
Post (77) with two M5x10 Bolts (86) that were removed.    Tighten bolts with the Multi Hex
Tool with Phillips Screwdriver provided.

Tool:

Allen Wrench 6mm

Tool:

Multi Hex Tool with Phillips Screwdriver

S13, S14, S15

«
...
15
16
17
18
19
...
»

Содержание Orbi trac 28320




























Отзывы:

Нет отзывов

Похожие инструкции для Orbi trac 28320

Бренд: NordicTrack Страницы: 44

Бренд: Proteus Страницы: 36

MOTIVE FITNESS V-fit CT400

Бренд: U.N.O Страницы: 28

MOTIVE FITNESS CTX 1000

Бренд: U.N.O Страницы: 124

Бренд: hilton Страницы: 20

Navarre Elite Elliptical

Бренд: Yowza Страницы: 41

ELLIPTICAL XE-7400

Бренд: SteelFlex Страницы: 42

Бренд: SteelFlex Страницы: 52

Бренд: fitness gear Страницы: 32

Бренд: ICON Health & Fitness Страницы: 20

Endurance Zone SF-E3804

Бренд: Sunny Health & Fitness Страницы: 19

675 Cardio CrossTrainer

Бренд: Pro-Form Страницы: 16

Бренд: Pro-Form Страницы: 24

7.0 Re Elliptical

Бренд: Pro-Form Страницы: 28

EasyFit WLIVEL86172.0

Бренд: Weslo Страницы: 20

Бренд: Nexersys Страницы: 24

Бренд: Nexersys Страницы: 38

Бренд: HMS Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды