2
COMPONENTS
& ASSEMBLY
1.
Attach the Outer Support Column (T) to the Base (W) with the four
3
/
8
Carriage bolts (B). Secure the bolts to the underside of the base with the
4 Locking Washers (C) and Locking Nuts (D) as shown in diagram.
2.
Place the front and rear Base Covers (U & V) over the base of the Outer
Support Column (T), and secure to the base with the four 4 x 16 Small
Screws (G), as shown in diagram.
3.
Clasp the front & rear Knob Casing pieces (R & S) together over the
top end of the Outer Support Column (T) and join with the two
M8 x 30 Long Bolts (A) as shown.
4.
Secure the Head (M) onto the Inner Support Column (P) with
the two Hex Bolts (E) and Flat Washers (F).
5.
Insert the Inner Support Column (P) into the Outer Support
Column (T). Thread the Height Adjustment Knob (Q) into
the hole centered in the Knob Casing’s (R) opening, and
insert into any of the holes in the Inner Column to set height.
6.
Insert the tip of the Belt Attachment Head (K) into the hole
marked with the speed you prefer, on the Speed Setting Knob ( J).
Assembly
R
U
T
W
X
B
D
M
E
F
O
G
P
H
Q
V
S
I
C
L
A)
M8 x 30 Long Bolts (2)
B)
3
/
8
Carriage Bolts (4 )
C)
3
/
8
Locking Washers (4)
D)
3
/
8
Locking Nuts (4 )
E)
5
/
16
x
5
/
8
Hex Bolts (2)
F)
5
/
16
Flat Washers (2)
G)
4 x 16 Small Screws (4 )
H)
Allen Key / Screwdriver
I)
2-Sided Wrench
J)
Speed Setting Knob
K)
Belt Attachment Head
L)
Roller Massage Belt
M)
Head
N)
Power Switch
O)
Flat Massage Belt
P)
Inner Support Column
Q)
Height Adjustment Knob
R)
Knob Casing (front)
S)
Knob Casing (rear)
T)
Outer Support Column
U)
Base Cover (front)
V)
Base Cover (Rear)
W)
Base
X)
Foot Plate
A
J
J
K
K
N
