14
CARE, MAINTENANCE &
TROUBLE SHOOTING
GUIDE
WARNING:
To prevent electrical shock, please turn off and unplugged the treadmill before cleaning or routine maintenance.
CLEANING
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be careful not get excessive
moisture on the display panel as this might cause an electrical hazard or electronics to fail. Please keep the treadmill, specially, the
console, out of direct sunlight to prevent screen damage.
STORAGE
Store the treadmill in a clean and dry environment. Ensure the master power switch is off and is at the off position and the power
plug is un-plugged from the electrical wall outlet.
TROUBLE SHOOTING GUIDE
Problem
Adjust running belt tension.
1. Put the power plug into the electrical
wall outlet.
2. Install the safety tether key.
3. Reset or have an electrician replace
the breaker in home.
4. Wait five minutes and then press the
switch back in.
Running belt hesitates
When stepped on.
Running belt slips.
1. Not plugged in.
2. Safety tether key not installed.
3. House circuit breaker tripped.
4. Treadmill circuit breaker tripped.
Running belt is off centered.
Treadmill will not start.
Corrections
Potential Cause
Running belt not tight enough.
1. Not enough lubrication applied
onto the running deck.
2. Running belt too tight.
Running belt tension not even
across the rear roller.
Center the running belt.
1. Apply silicone lubricant.
2. Adjust running belt tension.
