background image

7.2

S

ETTINGS

M

ENU

O

PTIONS

A

UDIO

The audio option allows you to turn the audio or beeps on or off for the Leg Sculptor key, Stride Down key, and Stride Up
key. To turn the audio off for the Total Body Trainer key, Level Up key, and Level Down key you must turn the audio or
beeps off on the main console. This is because the Total Body Trainer, Level Up, and Level Down keys cause the main
console to beep and not the activity zone. In summary if you would like to turn all sound on/off make sure to turn the
audio on/off on the main console and X7 activity zone display. See the main console user manual for steps on turning
audio on/off on the main console. Follow the below instructions to turn audio on/off for the Leg Sculptor key, Stride Down
key, and Stride Up key.

AUDIO ADJUSTMENT INSTRUCTIONS

Step 1.

Press and hold the Leg Sculptor Key for three plus seconds then press the Stride Down Key.

Step 2.

The first option to appear should be Audio (AU).

To adjust the audio from ON to OFF or vice versa press the stride length up or down key. The bottom stride length
level bar represents Audio ON and the top stride length level bar represents Audio OFF.

Step 3.

To select the desired adjustments press the Leg Sculptor key once.  This will save any changes you have

made to audio and advance you to the next settings menu option.

Step 4.

To exit the settings menu continue to press the Leg Sculptor key to scroll through all menu options. Upon

pressing the Leg Sculptor key on the final menu option the settings menu will be exited.

29

Содержание X7














































Отзывы: