Life Fitness X5, Руководство пользователя

Страница: 16 / 28

4
I
NITIAL
S
ETUP
Read the entire User Manual before setting up the Total-Body Elliptical Cross-Trainer.
Note: This Total Body Elliptical Cross-Trainer is speed independent. Resistance can be adjusted by means other than
speed.
W
HERE TO
P
LACE THE
T
OTAL
-B
ODY
E
LLIPTICAL
C
ROSS
-T
RAINER
After following all safety instructions move the Total-Body Elliptical Cross-Trainer to the place
where it will be used. Allow a minimum clearance of 12 inches (30.5 cm) around the product.
See specifications for full dimensions if needed. The Total-Body Elliptical Cross-Trainer is
equipped with front and rear wheels so that it is simple to push or pull the Total-Body Elliptical
Cross-Trainer to its final destination. To use the wheels make sure that the levelers are twist-
ed up far enough so that all wheels (A) can engage with the floor. Once the Total-Body
Elliptical Cross-Trainer is properly positioned, allow enough space in the front of the Total-
Body Elliptical Cross-Trainer for the movement of the pedal levers. Also be sure to allow
space on the side so that it is easy to mount the Total-Body Elliptical Cross-Trainer from the
side.
CAUTION: Make certain you have plenty of room for the swing of
the moving arms. Test the Total-Body Elliptical Cross-Trainer at all
stride lengths before finalizing its location.
CAUTION: Place Total-Body Elliptical Cross-Trainer in a dry
place. Do not place in highly humid areas, like near swimming
pools, as rust and corrosion may occur.
H
OW TO
S
TABILIZE THE
T
OTAL
-B
ODY
E
LLIPTICAL
C
ROSS
-T
RAINER
Once the cross-trainer is positioned in the room lower the levelers on the front stabilizer to contact the floor. The levelers
will keep the cross-trainer fixed to the floor while using it.
CAUTION: Do not use the Total-Body Elliptical Cross-Trainer without the levelers touching the floor. After placing the
Total-Body Elliptical Cross-Trainer where it will be used, check the stability. If there is even a slight rocking motion, or the
unit is not stable the levelers will need to be adjusted. Determine which leveler is not resting firmly on the floor. To adjust
the levelers downward twist the rubber portion of the leg counterclockwise. To adjust the levelers upward twist the rubber
portion of the leg clockwise.
Note: After the Cross-Trainer is level, be sure to tighten the nut on the leveler against the stabilizer tube. If this is not
tightened, noise will occur.
P
OWERING
U
P THE
T
OTAL
-B
ODY
E
LLIPTICAL
C
ROSS
-T
RAINER
Your Life Fitness Total-Body Elliptical Cross-Trainer may come with either a U.S. power
supply or one of several international power supplies. Insert the appropriate power
adapter jack into the connector (B) on the back of the Total-Body Elliptical Cross-Trainer.
Then insert the plug into the wall outlet. Make sure the cord is placed so it doesn't bind
and will not be walked on. Then check that the main LCD display lights up, and press a
button on the CoachZone to make sure it is powered. If not, recheck the plug and the
wall connections and make sure the wall outlet has power
M
OUNTING THE
M
ACHINE
When mounting the machine it is recommended that the pedal closest to you is in its lowest position. This can be done by
pushing the arms to rotate the pedal until it is centered to the side of you at its lowest position. If you are standing to the left
side of the machine, when facing the console, place your left foot on the pedal closest to you and then swing your right leg
over the right pedal. Use the stationary handlebar to stabilize yourself.
D
ISMOUNTING THE
M
ACHINE
Bring the machine to a stop. It is recommended to put the pedal in it’s lowest position on the side of the unit you will be dis-
mounting. If dismounting the machine on the left side, when facing the console, step off with the right leg first followed by
the left leg. Use the stationary handlebar for stabilization.
S
TRIDE
L
ENGTH FOR
D
IFFERENT
U
SERS
The X5 has stride lengths from 18 inches to 24 inches (46 cm to 61 cm). While it is fine for all size users to utilize any of
the stride lengths, research has shown that shorter users may prefer a shorter stride length while taller users may prefer a
longer stride length.
A
14
B
12“ (30.5cm) 12“ (30.5cm)
12“ (30.5cm)
12“ (30.5cm)