Kit No. GK62-00002-0070
Document No. M051-00K62-A199
08 Sep 2008
Fig 1: removing the user arm
Fig 2: separating the pedal from the rocker arm
How To Install the Rocker Arm Kit
Tools required: Phillips screwdriver, T-45 Torx wrench, 4½ mm Allen wrench, snap ring tool
Estimated time required: 1 hour (to install both rocker arms) plus Loctite curing time (30 minutes)
KIT CONTENTS
Rocker arms (2)
Metal thrust washers (2)
Oilite washers (4: 2 thick, 2 thin)
Snap rings (2)
Loctite #620 (2 tubes)
Alcohol wipe (1)
PROCEDURE
1.
Remove the outer deadshaft covers.
2.
Disconnect the heart rate cable.
3.
Remove the user arm (see Figure 1).
4.
Remove the lower rocker arm cover (see
Figure 2).
5.
Separate the rocker arm from the pedal.
