Install Console Support Weldment
1.
Place top cap gasket on console support weldment.
2.
Route cables up through console support weldment.
3.
Secure console support weldment to base.
Item
Description
Qty.
1
Console Support Weldment
1
2
Top Cap Gasket
1
3
M8 X 18mm Hex Washer Head Screw
4
4
Cables
18-20 ft. lbs. (24.4-27.1 Nm)
Secure Top Cover to Base
1.
Install plastic grommets into the front panel shroud.
Item
Description
Qty.
1
Plastic Grommet
3
2.
Use screws to secure top cover to base.
Item
Description
Qty.
1
M4 X 16mm Phillips Pan Head Screw
7
2
Top Cap Gasket
1
10 - 12 in. lbs. (1.1 - 1.3 Nm)
3.
Slide top cap gasket down the console support weldment so it rests flat against the top cover.
Page 11 of 23
