Electrical Power Requirements (Applicable for Units Using External Power Supply)
This unit is self powered or can be used with an optional external power supply. Use of an attachable TV requires an
external 12V power supply. Use of a Discover Console requires a 24V power supply.
WARNING: Use only the supplied power brick and line cord. Do not use any modification to connect to a 2-
prong outlet. Product must be connected to a properly rated 3-prong outlet.
Console
Supply Voltage
Frequency
Output Voltage
Output Current
Integrity X / Integrity C
95 - 264 VAC
47 - 63 Hz
12 VDC
5 A
Discover SE3 / SE 3 HD /
ST
95 - 264 VAC
47 - 63 Hz
24 VDC
2.5 A
WARNING: DO NOT USE A 24VDC POWER SUPPLY WITH INTEGRITY CONSOLES!
Outlet Voltage
Commercial Units Outlet &
Breaker (Amps)
Consumer / Home Units Outlet &
Breaker (Amps)
120 VAC
20 (no more than 10 bikes per
breaker for Integrity; 5 bikes per
breaker for Discover)
15 (no more than 8 bikes per
breaker for Integrity; 4 bikes per
breaker for Discover)
230 VAC
12 (no more than 10 bikes per
breaker for Integrity; 5 bikes per
breaker for Discover)
12 no more than 8 bikes per
breaker for Integrity; 4 bikes per
breaker for Discover)
NOTE: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet,
have a proper outlet installed by a qualified electrician.
NOTE: Make sure the power brick cord is securely connected to the base unit. A loose connection may result in the
unit not receiving external power.
Check for Console Power
The Integrity X and Integrity C consoles are powered by a rechargeable 6-volt battery. Check the battery by pressing
the GO button. The console should beep and light up. The console will display the Life Fitness logo. If a prompt
doesn’t appear, mount the unit and begin pedaling. The console should light up and programming a workout should
be possible. Pedal for 10 - 20 minutes at 50 rpm or faster during a workout for optimum battery charging. The pedal
action during workouts keeps the battery charged. Optional external power supply can be used. If the unit is externally
powered, battery maintenance is automatic and pedaling is not required. Use only the power supply provided by
Life
Fitness
to insure against unsafe operation.
Power Assist Option / External Power Supply
The bike's optional Power Assist feature makes it possible for the console to be powered by an external electrical
source. This eliminates the need to pedal at a minimum speed to supply constant power to the console. With this
option, users who ride the bike for rehabilitative exercise may pedal at a rate below the minimum without losing
console power.
Plug the power to the external power connector on the front end of the bike. Plug the cord into an AC outlet. Use only
the external power supply provided by
Life Fitness
in order to insure against unsafe operation.
CAUTION: Connectors should easily fit into the receptacles. Forcing a connection may lead to damage to the
barrel connector and/or receptacle and may void product warranty. If the power supply barrel doesn’t fit easily
into the receptacle then the wrong power supply is being used.
The Power Assist feature option requires an optional kit. Contact
Life Fitness
Customer Support Services to order the
kit.
Page 9 of 38
