Attach Monocolumn to Base
CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment prior
to attaching to base! Failure to remove the protective covering can cause improper grounding!
NOTE: Route console cables through moncolumn.
Item
Description
Qty.
1
Monocolumn
1
2
M8 Hex Lock Nut
Reuse the previously removed
M8 Hex Lock Nuts
4
34 Nm (25.1 ft. lbs.)
Secure Left Monocolumn Shroud to Monocolumn
Item
Description
Qty.
1
Monocolumn Shroud, Left
1
2
M4.2 X 19 Phillips Pan Head Screw
2
3
Grommet
2
1.5 Nm (1.1 ft. lbs.)
Attach Right Monocolumn Shroud to Left Monocolumn Shroud
Secure the clips on the right monocolumn shroud into position on the left monocolumn shroud.
NOTE: Push gasket down to shrouds.
Item
Description
Qty.
1
Monocolumn Shroud, Right
1
2
Gasket
(attached to monocolumn)
1
Page 21 of 30