9
EN
G
HOW TO ASSEMBLE THE
INDOOR CYCLE
TORQUE WRENCH
6 MM BALL HEX SOCKET
2
PEOPLE
3.
3 MM
4.
LOOSEN THE THUMB LEVER AND PUSH THE
HORIZONTAL SLIDER TO THE FORWARD POSITION.
INSERT AND FASTEN THE END CAP WITH A CAP HEAD
SCREW AND 3 MM HEX KEY.
6.
30 NM
MOUNT THE HANDLEBAR TO THE STEM WITH 2
COUNTER SUNK HEX BOLTS. TIGHTEN TO 30 NM
WITH A TORQUE WRENCH. THE BOLTS ARE
PRE-COATED WITH A THREAD LOCK WHEN
TIGHTENED FOR THE FIRST TIME. IF THE BOLTS
SHOULD LOOSEN, GLUE BOLTS WITH
LOCKTITE (R) 2701 UPON RETIGHTENING.
LOCK THE THUMB LEVER.
REMOVE THE LIMIT STOP WITH A 3 MM HEX KEY.
NEVER PULL THE HANDLEBAR TOWARD THE SEAT
WHEN THE LIMIT STOP IS REMOVED. THIS WILL
DAMAGE THE INTERNAL CABLE!
5.
