manualshive.com logo in svg

Life Fitness Hammer Strength PL-4W, Руководство пользователя

Поделиться
Скачать
Life Fitness Hammer Strength PL-4W Скачать руководство пользователя страница 63

Static Anchor Procedure

CAUTION: If it is possible that the length of your bolt will not provide the minimum requirement of 2.5”
(63.5mm) of engagement, a longer anchor should be used.

1.

Place unit into position to be mounted and cycle unit to set stance.

2.

Each foot 

must

 get at least one static fastener.

3.

Wearing protective glasses, drill down into the flooring to the required depth as perpendicular as possible,
ensuring that the foot thickness is being accounted for; refer to 

Anchor Selection

 and 

Foot Dimensions

.

4.

Insert fastener and tighten to 18 Foot-Pounds (24Nm) for 1/4” (6mm) anchor or 40 Foot-Pounds (54Nm) for 3/8”
(8mm) anchor.

NOTE: If the legs/frame do not contact the mounting surface 

DO NOT

 pull down with the fastener or anchor.

Loosen frame hardware and re-tighten to allow machine to align.

Page 61 of 62

Содержание Hammer Strength PL-4W



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды