
Setting
Default
Description
System Sounds
On
This option controls whether the system speaker beep is generated
on key presses.
Marathon Mode
Enabled
This option allows the user to workout indefinitely.
Life Fitness On
Demand
Off
This option activates complete access to the growing library of Life
Fitness instructor-led classes.
NOTE: The library will only appear if the unit is connected to the
internet. 2.5 Mbps of bandwidth per unit recommended for optimal
functioning.
Nightly Reboots
Off
When turned on, the console will detect the least active time of day
for the unit and automatically reboot every 24 hours at that time. This
is recommended for optimal functioning of streaming services, like
Life Fitness On Demand or Netflix.
Telemetry
Enabled
Switching on the telemetry feature makes it possible to use the
Polar
®
-compatible Heart Rate Zone Training exercises with a Polar
telemetry heart rate chest strap for monitoring the heart rate.
Speed Increase
Limiting with Up Key
Off
When enabled, the user cannot press and hold the speed button to
increase the speed.
Fit Test Plus
On
Turns on/off the US Navy test and FAMS
Treadmill Only
Setting
Default
Description
Maximum Speed
14.0 MPH (23 KPH)
Set the fastest speed the treadmill can operate.
Minimum Speed
0.5 MPH (0.8 KPH )
Set the slowest speed the treadmill can operate.
Maximum % Incline
15.0
This option changes the maximum incline grade to a value lower than
15%.
Activity Zone Speed
Keys
Enabled
This option allows the user to assign belt speed to Walk / Jog / Run
values.
Stride Sensor (95T
only)
On
This option automatically pauses the workout if the user steps off the
belt.
Deceleration Rate
3
The rate at which the treadmill decelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
Acceleration Rate
3
The rate at which the treadmill accelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
Turn OFF Stride
Sensor Notification
Stride Sensor Button
On Pause Button
Disabled
This option detects a user using a treadmill but will not go into Pause
mode if a user is not detected.
PowerMill Only
Setting
Default
Description
Warm Up Speed:
Level 0 (12-19 SPM)
Off
This option, if enabled, controls whether or not Level 0 may be used
in program setup or during a workout. Level 0 corresponds to
intensity levels below Level 1.
High Speeds: Level
21-25 (160-182 SPM)
On
This option controls whether or not Levels 21 though 25 may be used
in program setup or during a workout (MANUAL and SPEED
INTERVAL workouts ONLY).
Page 51 of 86
Содержание Discover SE3HD
Страница 2: ......