Before You Begin
1.
The console support weldment is positioned face down in the parts tray table packaging.
Item
Description
Qty.
1
Console Support Weldment
1
2
Parts Tray Table Packaging
1
CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment
prior to attaching to base! Failure to remove the protective covering can cause improper grounding!
2.
Lift the console support weldment up and out of the parts tray table.
3.
Secure the console support weldment to the frame using four M8 X 20 Flange Head Cap Screws.
Item
Description
Qty.
1
Console Support
Weldment
1
2
M8 X 20 Flange
Head Cap Screw
4
27 Nm (19.91 ft.
lbs.)
Page 27 of 33
