background image

3

INSPECTION

1.

DO NOT use or permit use of any equipment that is damaged and or has worn or broken parts. For all 
LIFE FITNESS equipment use only replacement parts supplied by LIFE FITNESS. 

2.

Cables and Belts pose an extreme liability if used when frayed. Always replace any cable at first sign of 
wear (consult LIFE FITNESS if uncertain). 

3.

Routinely inspect all accessory clips that join attachments to the cables and replace at the first sign of 
wear. 

4.

MAINTAIN LABELS AND NAMEPLATES - Do not remove labels for any reason. They contain important 
information. If unreadable or missing, contact LIFE FITNESS for a replacement. 

5.

EQUIPMENT MAINTENANCE - Preventative maintenance is the key to smooth operating equipment as 
well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 

6.

Ensure that any person(s) making adjustments or performing maintenance or repair of  any kind is quali-
fied to do so. LIFE FITNESS will provide service and maintenance training at our corporate facility upon 
request or in the field if proper arrangements are made.

7.

Before any use, examine all accessories approved for use with the LIFE FITNESS equipment for 
damage or wear.

8.

DO NOT ATTEMPT TO USE OR REPAIR ANY ACCESSORY APPROVED FOR USE WITH THE LIFE 
FITNESS EQUIPMENT WHICH APPEARS TO BE DAMAGED OR WORN.

OPERATING WARNINGS 

1.

It is the purchaser's sole responsibility to properly instruct its end users and supervising personnel as to 
the proper operating procedures of all LIFE FITNESS equipment. 

2.

Keep children away from strength equipment. Parent or others supervising children must provide close 
supervision of children if the equipment is used in the presence of children. 

3.

Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is also recommend-
ed to have user's secure long hair back and up to avoid contact with moving parts. 

4.

All bystanders must stay clear of all users, moving parts and attached accessories and components 
while machine is in operation.

SELECTORIZED WEIGHT STACK SYSTEMS

1.

Use only weight selector pins supplied by LIFE FITNESS on weight stacks. Substitutes are forbidden. 

2.

Fully insert weight selector pins. Partial insertion can cause weights to fall unexpectedly.

3.

Never pin the weight stack in an elevated position.

4.

Never remove selector pin if any weights are suspended.

5.

Never attempt to release jammed weights or parts. 

6.

Never use dumbbells or other means to incrementally increase the weight resistance. Use only those 
means provided by LIFE FITNESS. 

Содержание Cable Motion 39721

























Отзывы: