Life Fitness Model 9500L Cross-Trainer
How To...Remove and Replace the 4”, and 14” Linkage Assemblies (Continued)
Step 15
Attach the forward end of the 14” LINK BAR to the SMALL EXTENSION BAR (Y). Position the thin METAL WASHER
(#1) over the shouldered edge of the SHOULDERED SLEEVE (#5), and slide the 14” LINK BAR (I) over the non-
shouldered edge of the SHOULDERED SLEEVE. Slide the SPACER (#3) next to the 14” LINK BAR.
Step 16
Slide the BOLT (#10) through the end of the SMALL EXTENSION ARM (Y) as shown above. Place a METAL
WASHER (#4), EXTERNAL TOOTH LOCKING WASHER (#8) and NUT (#9) onto the BOLT and tighten.
Step 17
Reverse steps 1 through 4 to replace the SHROUD. The installation is now complete.
Y
5
O
11
8
4
3
1
14
MO51-00K53-A033
