LIFAN Power USA
2205 Industrial Park Road
Van Buren, AR 72956
866-‐471-‐7464
www.lifanpowerusa.com
12
Pre-‐Operating Instructions: Generator Setup
CAUTION
: Any attempt to start the generator before it has been properly serviced may
result in engine failure.
ADD ENGINE OIL:
Refer to Controls and Features section or diagram and definitions.
1.
Place generator on level surface.
2.
Clean area around Oil Hole Dipstick/Plug & Unscrew Oil Hole Dipstick/Plug.
3.
Fill crankcase with appropriate type and amount of oil. Refer to “Product
Specifications” section for oil type and amount.
4.
Replace Oil Hole Dipstick/Plug and tighten securely.
WARNING!
Fuel and its vapors are extremely flammable and explosive.
Fire or explosion can cause severe burns or death.
WHEN ADDING FUEL
•
Turn generator off and let it cool for a minimum of three minutes before removing fuel cap. Turn and remove cap slowly
in order to relieve residual tank pressure.
•
Always fill the fuel tank with the unit outdoors.
•
DO NOT overfill tank. Allow room for fuel expansion.
•
Keep fuel away from sparks, open flames, heat, pilot lights, and other ignition sources.
